Chapter 6 Multiprocessors and Thread-Level Parallelism

EEF011 Computer Architecture 計算機結構 Chapter 6 Multiprocessors and Thread-Level Paral elism 吳俊興 高雄大學資訊工程學系 December 2004

---

Chapter 6. Multiprocessors and Thread-Level Paral elism 6.1 Introduction6.2 Characteristics of Application Domains6.3 Symmetric Shared-Memory Architectures6.4 Performance of Symmetric Shared-Memory Multiprocessors 6.5 Distributed Shared-Memory Architectures6.6 Performance of Distributed Shared-Memory Multiprocessors 6.7 Synchronization6.8 Models of Memory Consistency: An Introduction6.9 Multithreading: Exploiting Thread-Level Paral elism within a Processor 2

---

6.1 Introduction • Increasing demands of parallel processors –Microprocessors are likely to remain the dominant uniprocessor technology• Connecting multiple microprocessors together is likely to be more cost- effective than designing a custom parallel processor –It’s unclear whether architectural innovation can be sustained indefinitely• Multiprocessors are another way to improve paral elism –Server and embedded applications exhibit natural paral elism to be exploited beyond desktop applications (ILP) • Chal enges to architecture research and development –Death of advances in uniprocessor architecture?–More multiprocessor architectures failing than succeeding • more design spaces and tradeoffs 3

---

Taxonomy of Parallel Architectures Flynn Categories • SISD (Single Instruction Single Data) – Uniprocessors • MISD (Multiple Instruction Single Data) – ???; multiple processors on a single data stream • SIMD (Single Instruction Multiple Data) – same instruction executed by multiple processors using different data streams • Each processor has its data memory (hence multiple data) • There’s a single instruction memory and control processor – Simple programming model, Low overhead, Flexibility – (Phrase reused by Intel marketing for media instructions ~ vector) – Examples: vector architectures, Il iac-IV, CM-2 • MIMD (Multiple Instruction Multiple Data) – Each processor fetches its own instructions and operates on its own data – MIMD current winner: Concentrate on major design emphasis <= 128 processors • Use off-the-shelf microprocessors: cost-performance advantages • Flexible: high performance for one application, running many tasks simultaneously – Examples: Sun Enterprise 5000, Cray T3D, SGI Origin 4

---

MIMD Class 1: Centralized shared-memory multiprocessor share a single centralized memory, interconnect processors and memory by a bus • also known as “uniform memory access” (UMA) or “symmetric (shared-memory) multiprocessor” (SMP) – A symmetric relationship to all processors – A uniform memory access time from any processor • scalability problem: less attractive for large-scale processors 5

---

MIMD Class 2: Distributed-memory multiprocessor memory modules associated with CPUs • Advantages: – cost-effective way to scale memory bandwidth – lower memory latency for local memory access • Drawbacks – longer communication latency for communicating data between processors – software model more complex 6

---

MIMD Hybrid I (Clusters of SMP): Distributed Shared Memory Multiprocessor Proc. Proc. Proc. Proc. Proc. Proc. Caches Caches Caches Caches Caches Caches Node Interc. Network Node Interc. Network Memory I/O Memory I/O Cluster Interconnection Network Physically separate memories addressed as one logically shared address space – a memory reference can be made by any processor to any memory location – also called NUMA (Nonuniform memory access) 7

---

MIMD Hybrid II (Multicomputers): Message-Passing Multiprocessor •Data Communication Models for Multiprocessors –shared memory: access shared address space implicitly via load and store operations –message-passing: done by explicitly passing messages among the processors • can invoke software with Remote Procedure Cal (RPC)• often via library, such as MPI: Message Passing Interface• also cal ed "Synchronous communication" since communication causes synchronization between 2 processes •Message-Passing Multiprocessor –The address space can consist of multiple private address spaces that are logical y disjoint and cannot be addressed by a remote processor –The same physical address on two different processors refers to two different locations in two different memories •Multicomputer (cluster): can even consist of completely separate computers connected on a LAN–cost-effective for applications that require little or no communication 8

---

Comparisons of Communication Models Advantages of Shared-Memory Communication Model • Compatibility with SMP hardware • Ease of programming when communication patterns are complex or vary dynamical y during execution • Ability to develop applications using familiar SMP model, attention only on performance critical accesses • Lower communication overhead, better use of bandwidth for small items, due to implicit communication and memory mapping to implement protection in hardware, rather than through the I/O system • Hardware-control ed caching to reduce the frequency of remote communication by caching of all data, both shared and private Advantages of Message-Passing Communication Model • The hardware can be simpler (esp. vs. NUMA) • Communication explicit => simpler to understand; in shared memory it can be hard to know when communicating and when not, and how costly it is • Explicit communication focuses programmer attention on costly aspect of paral el computation, sometimes leading to improved structure in multiprocessor program • Synchronization is natural y associated with sending messages, reducing the possibility for errors introduced by incorrect synchronization • Easier to use sender-initiated communication, which may have some advantages in performance 9

---

6.3 Symmetric Shared-Memory Architectures Caching in shared-memory machines• private data: used by a single processor – When a private item is cached, its location is migrated to the cache– Since no other processor uses the data, the program behavior is identical to that in a uniprocessor • shared data: used by multiple processor – When shared data are cached, the shared value may be replicated in multiple caches – advantages: reduce access latency and memory contention– induce a new problem: cache coherence Coherence cache provides:• migration: a data item can be moved to a local cache and used there in a transparent fashion • replication for shared data that are being simultaneously readboth are critical to performance in accessing shared data 10

---

Multiprocessor Cache Coherence Problem • Informally: – “Any read must return the most recent write” – Too strict and too difficult to implement • Better: – “Any write must eventually be seen by a read” – Al writes are seen in proper order (“serialization”) • Two rules to ensure this: – “If P writes x and then P1 reads it, P’s write will be seen by P1 if the read and write are sufficiently far apart” – Writes to a single location are serialized: seen in one order • Latest write will be seen • Otherwise could see writes in il ogical order (could see older value after a newer value) 11

---

Two Classes of Cache Coherence Protocols •Snooping Solution (Snoopy Bus) – Send al requests for data to all processors– Processors snoop to see if they have a copy and respond accordingly – Requires broadcast, since caching information is at processors– Works well with bus (natural broadcast medium)– Dominates for small scale machines (most of the market) •Directory-Based Schemes (Section 6.5) – Directory keeps track of what is being shared in a centralized place (logically) – Distributed memory => distributed directory for scalability (avoids bottlenecks) – Send point-to-point requests to processors via network– Scales better than Snooping– Actually existed BEFORE Snooping-based schemes 12

---

Basic Snoopy Protocols • Write strategies – Write-through: memory is always up-to-date– Write-back: snoop in caches to find most recent copy • Write Invalidate Protocol – Multiple readers, single writer– Write to shared data: an invalidate is sent to all caches which snoop and invalidate any copies• Read miss: further read wil miss in the cache and fetch a new copy of the data • Write Broadcast/Update Protocol (typical y write through) – Write to shared data: broadcast on bus, processors snoop, and update any copies – Read miss: memory/cache is always up-to-date • Write serialization: bus serializes requests! – Bus is single point of arbitration 13

---

Examples of Basic Snooping Protocols Write Invalidate Write Update Assume neither cache initial y holds X and the value of X in memory is 0 14

---

Comparisons of Basic Snoopy Protocols • Multiple writes to the same word with no intervening reads – multiple write broadcasts in an write update protocol– only one initial invalidation in a write invalidate protocol • With multiword cache blocks, each word written in a cache block – A write broadcast for each word is required in an update protocol– Only the first write to any word in the block needs to generate an invalidate in an invalidation protocols An invalidation protocol works on cache blocks, while an update protocol must work on individual words • Delay between writing a word in one processor and reading the written value in another processor is usual y less in a write update scheme – In an invalidation protocol, the reader is invalidated first, then later reads the data 15

---

An Example Snoopy Protocol Invalidation protocol, write-back cache• Each cache block is in one state (track these): – Shared : block can be read– OR Exclusive : cache has only copy, its writeable, and dirty– OR Invalid : block contains no data– an extra state bit (shared/exclusive) associated with a valid bit and a dirty bit for each block • Each block of memory is in one state: – Clean in al caches and up-to-date in memory (Shared)– OR Dirty in exactly one cache (Exclusive)– OR Not in any caches • Each processor snoops every address placed on the bus – If a processor finds that is has a dirty copy of the requested cache block, it provides that cache block in response to the read request 16

---

Cache Coherence Mechanism of the Example Placing a write miss on the bus when a write hits in the shared state ensures an exclusive copy (data not transferred) 17

---

Figure 6.11 State Transitions for Each Cache Block Requests from CPU Requests from bus •CPU may read/write hit/miss to the block •May receive read/write miss from bus •May place write/read miss on bus 18

---

Cache Coherence State Diagram Figure 6.10 and Figure 6.12 (CPU in black and bus in gray from Figure 6.11) 19

---

6.5 Distributed Shared-Memory Architectures Distributed shared-memory architectures• Separate memory per processor – Local or remote access via memory control er– The physical address space is statical y distributed Coherence Problems• Simple approach: uncacheable – shared data are marked as uncacheable and only private data are kept in caches – very long latency to access memory for shared data • Alternative: directory for memory blocks – The directory per memory tracks state of every block in every cache • which caches have a copies of the memory block, dirty vs. clean, … – Two additional complications • The interconnect cannot be used as a single point of arbitration like the bus• Because the interconnect is message oriented, many messages must have explicit responses 20

---

Distributed Directory Multiprocessor To prevent directory becoming the bottleneck, we distribute directory entries with memory, each keeping track of which processors have copies of their memory blocks 21

---

Directory Protocols • Similar to Snoopy Protocol: Three states – Shared: 1 or more processors have the block cached, and the value in memory is up-to-date (as well as in al the caches) – Uncached: no processor has a copy of the cache block (not valid in any cache)– Exclusive: Exactly one processor has a copy of the cache block, and it has written the block, so the memory copy is out of date• The processor is cal ed the owner of the block • In addition to tracking the state of each cache block, we must track the processors that have copies of the block when it is shared (usual y a bit vector for each memory block: 1 if processor has copy) • Keep it simple(r): – Writes to non-exclusive data => write miss – Processor blocks until access completes– Assume messages received and acted upon in order sent 22

---

Messages for Directory Protocols •local node: the node where a request originates•home node: the node where the memory location and directory entry of an address reside•remote node: the node that has a copy of a cache block (exclusive or shared) 23

---

State Transition Diagram for Individual Cache Block • Comparing to snooping protocols: – identical states– stimulus is almost identical– write a shared cache block is treated as a write miss (without fetch the block) – cache block must be in exclusive state when it is written – any shared block must be up to date in memory • write miss: data fetch and selective invalidate operations sent by the directory control er (broadcast in snooping protocols) 24

---

State Transition Diagram for the Directory Figure 6.29 Transition diagram for cache block Three requests: read miss, write miss and data write back 25

---

Directory Operations: Requests and Actions • Message sent to directory causes two actions: – Update the directory– More messages to satisfy request • Block is in Uncached state: the copy in memory is the current value; only possible requests for that block are: – Read miss: requesting processor sent data from memory &requestor made only sharing node; state of block made Shared. – Write miss: requesting processor is sent the value & becomes the Sharing node. The block is made Exclusive to indicate that the only valid copy is cached. Sharers indicates the identity of the owner. • Block is Shared => the memory value is up-to-date: – Read miss: requesting processor is sent back the data from memory & requesting processor is added to the sharing set. – Write miss: requesting processor is sent the value. Al processors in the set Sharers are sent invalidate messages, & Sharers is set to identity of requesting processor. The state of the block is made Exclusive. 26

---

Directory Operations: Requests and Actions (cont.) • Block is Exclusive: current value of the block is held in the cache of the processor identified by the set Sharers (the owner) => three possible directory requests: – Read miss: owner processor sent data fetch message, causing state of block in owner’s cache to transition to Shared and causes owner to send data to directory, where it is written to memory & sent back to requesting processor. Identity of requesting processor is added to set Sharers, which stil contains the identity of the processor that was the owner (since it stil has a readable copy). State is shared. – Data write-back: owner processor is replacing the block and hence must write it back, making memory copy up-to-date (the home directory essentially becomes the owner), the block is now Uncached, and the Sharer set is empty. – Write miss: block has a new owner. A message is sent to old owner causing the cache to send the value of the block to the directory from which it is sent to the requesting processor, which becomes the new owner. Sharers is set to identity of new owner, and state of block is made Exclusive. 27

---

Summary Chapter 6. Multiprocessors and Thread-Level Paral elism6.1 Introduction6.2 Characteristics of Application Domains6.3 Symmetric Shared-Memory Architectures6.4 Performance of Symmetric Shared-Memory Multiprocessors 6.5 Distributed Shared-Memory Architectures6.6 Performance of Distributed Shared-Memory Multiprocessors 6.7 Synchronization6.8 Models of Memory Consistency: An Introduction6.9 Multithreading: Exploiting Thread-Level Paral elism within a Processor 28

---